Home > Products > Doors > Commercial Overhead Door 3 inch Energy Saver

Commercial Overhead Door 3 inch Energy Saver

Industry Leading Energy Saver Commercial Overhead Door

Midland’s best quality constructed 3″ Energy Saver commercial overhead door is the industry leader for strength and energy efficiency. Our 3″ Energy Saver overhead door has an R-Value of 17.05 and is by far, the strongest commercial overhead door in the industry. Our 3″ Energy Saver combines the good looks, outstanding durability and exceptional heavy-duty strength that will last for years to come. Midland’s 3″ Energy Saver overhead door is the longest lasting commercial overhead door in the industry.

When you choose a Midland commercial overhead door you can be confident that you have chosen the best overhead door that money can buy!

  • 25 ga. rugged exterior and interior steel (20 ga. exterior steel available)
  • High density closed cell polystyrene core resulting in an exceptional R-Value
  • Embossed pebble-grained texture
  • Heavy duty galvanized steel track and hardware
  • Available with many window size options
  • Available in White, Brown, Almond, Sandtone, Tera-Bronze, Hunter Green
  • Available in widths up to 40′ wide

 

»Architectural Specifications

  1. GENERAL
    • Work Included
      The doors will be Model 3″ Energy Saver as manufactured by Midland Garage Door Mfg. Co.
    • Other Work
      Related structure work, opening preparation, field painting and electrical work etc. falls into the responsibility of other trades.
  2. PRODUCT
    • Sections
      Sections will be roll-formed, hot dipped, galvanized 25 ga. pebble textured exterior and interior (optional 20 ga. exterior available). Sections will be pressure bonded to a closed cell polystyrene core and will have a thickness of 3″. Sections will incorporate a PVC thermal break to prevent heat or cold conductivity.
    • Insulation
      Insulation will be rigid 3″ closed cell extruded polystyrene free of CFCs and HCFCs and will be laminated to provide strength and prevent loss of thermal efficiency over time. The insulation will have a calculated R-Value of 17.05 and U-Value of .06 based on certified test data.
    • Air Infiltration
      All doors will be constructed with a PVC strip and bulb seal between sections to resist air infiltration
    • Wind load
      Doors will be designed to meet or exceed industry standards for wind loads (ANSI/ NAGDM 102-1988). Deflection of door in the horizontal position will not exceed 1/120 of the door width. Consult factory for unusual requirements.
    • End Stiles
      End stiles will be 16 gauge steel and incorporate a thermal break to help prevent heat/cold conductivity between the inside and exterior steel
    • Hardware
      Hinges and fixtures will be galvanized steel. Full floating ball bearing rollers will have hardened steel races. Roller sizes will be adequate for design requirements and limitations.
    • Track
      Track is 2″ or 3″ depending upon door size and requirements and angle mounted.
    • Spring Counterbalance
      Counter balance shall be oil tempered, helical wound torsion springs mounted on a ball bearing cross header shaft engineered for industrial application that comply with properties specified by ANSI/NAGDM 1021988. Galvanized aircraft type lifting cables with minimum safety factor of 8 to 1 and cast aluminum drums are standard.
    • Lock
      Lock will be interior mounted slide lock. (Optional commercial keyed lock is available.)
    • Weather-strip
      PVC Weather-strip between sections meeting rubber tube seals fitted inside every joint. Bottom weather-strip will be U’d shape astragal fastened to the bottom of the door with an extruded aluminum holder for an effective seal at the sill.
    • Finish
      Finish will be baked-on polyester over epoxy primer in White interior and White or Brown exterior, (20 GA exterior white only)
    • Operation
      Operation will be by manual pull rope. Optional chain hoist and electric operator are available.
  3. EXECUTION
    • Installation
      Doors should be installed in compliance with Midland Garage Door Mfg. Co. instructions by authorized Midland Garage Door Installation Professionals.
    • OPTIONS
      • Thermal Glazing
      • High Cycle Springs
      • Jamb Weather-strip
      • Electric Operator
      • Chain Hoist
      • Bottom Sensing Edge
      • Rubber Header Seal
      • Full Vision Aluminum Sections
      • Carwash Modification

Click here to download specifications in PDF format

 

»Color Design Options

Midland garage doors are available in several easily coordinated colors. Great looks and great quality, now that’s real value! Enhance the look of your building with a Midland overhead door and our great color design options.

Almond

 

 

 

Almond

 Brown

 

 

 

Brown

 Green

 

 

 

Green
Sandtone

 

 

 

Sandtone

 Terabronze

 

 

 

Terabronze

 White

 

 

 

White

»Window Design Sizes

Midland Garage Door offers a variety of window design sizes for your new door. These windows are sure to fit any design preference. Our window design options are designed with the same attention to detail we put into all of our products.

Plain

 

 

 

Plain- 24×7- 24×12- 44×15 sizes